LoRa fire alarm control panel system, LoRa wireless control panel, LoRa wireless fire control panel, can LoRa wireless fire alarm system pass fire acceptance inspection, installation method of LoRa wi
+8613261677119
Wanlin Fire Technology Co., Ltd.
LoRa Fire Alarm System Wireless Control Panel, LoRa Wireless Fire Control Panel, Can LoRa Wireless Fire Alarm System Pass Fire Acceptance, Installation Method of LoRa Wireless Fire Alarm System
The LoRa wireless fire alarm system is a fire detection and alarm solution based on low-power wide-area network (LPWAN) technology. It consists of terminal devices including a LoRa wireless fire control panel, wireless smoke detectors, wireless heat detectors, manual call points, and audible and visual alarms.
As the core of the system, the LoRa wireless fire control panel can connect hundreds of wireless terminals simultaneously, using the 433/470MHz frequency band for communication. It features strong penetration, ultra-low power consumption, and long transmission distance — the communication range can reach over 2 kilometers in open areas, with stable signal transmission even through walls.
Yes, it can.The system is designed in strict accordance with the China Fire Protection Association group standard Requirements for the Installation of Wireless Networked Fire Alarm Systems, as well as national standards GB 20517-2006 and GB 26851-2011. All products have obtained CCCF certification and comply with the General Requirements for Wireless Communication Functions of Fire Alarm Systems.
It is suitable for premises where traditional wired fire alarm systems are not mandatory under the Code for Fire Protection Design of Buildings, such as nine small venues, old residential communities, cultural relics and ancient buildings, homestays and hotels.
The system uses wireless communication and requires no extensive cabling, making construction extremely convenient. Wireless smoke detectors are battery-powered (service life over 2 years) and can be wall‑ or ceiling‑mounted directly.
For LoRa wireless fire control panel installation:
The antenna should be kept away from electromagnetic interference, metal objects and walls.
Keep a distance of at least 40cm from walls and 1.2 meters above the ground for optimal signal coverage.
The distance between terminal devices and the main control panel must be within the effective communication range, and shall not exceed 75% of the rated communication distance.
The system supports 4G networking, enabling real-time upload of alarm information to the cloud platform for remote monitoring and mobile APP push notifications.
In fire safety, time is life, and reliability is the bottom line. However, for many nine small venues, old communities, three-in-one premises, and even some new buildings, the deployment of traditional wired fire alarm systems faces three major obstacles: difficult cabling, high costs, and long construction periods.
Wall slotting damages decoration, construction noise disrupts business, and large‑scale cabling causes a sharp rise in labor and material costs — these problems have long plagued contractors and property owners.
Is there a solution that ensures compliance with fire acceptance, enables non‑destructive installation, and supports intelligent early warning?The answer is yes.
With deep expertise in smart fire protection, Wanlin Fire has launched a fire alarm system based on LoRa wireless technology. With its unique advantages of hybrid networking, ultra-long transmission, and extremely simple installation, it provides a perfect answer to these challenges.
Wanlin LoRa wireless fire alarm system (represented by the JB-QB-WL800 series) is not a simple replacement of wired with wireless, but a smart fire ecosystem with deep integration of wired + wireless.
The main control panel is equipped with 2 traditional 2‑wire wired loops and 2 LoRa wireless loops:
Wired loops handle key equipment linkage in core areas to ensure ultimate stability.
Wireless loops cover areas where cabling is difficult.
Ultra-long communication distance: Using LoRa (Long Range) spread spectrum technology, the wireless coverage radius between sub-devices (smoke detectors, manual call points) and the gateway can reach 2 kilometers in open areas. Communication remains stable even through interior walls.
Large-capacity loading: A single wireless main panel can manage up to 250 wireless alarm zones, supporting flexible connection of wireless smoke detectors, heat detectors, manual call points, sound and light alarms, gas detectors, etc., enabling full‑coverage monitoring of fire hazards.
Many customers hold a wait‑and‑see attitude toward wireless fire products, with the biggest question being:“Without wiring, can it pass fire acceptance?”
Compliance is the bottom line of design. Wanlin LoRa series products are developed in strict accordance with national standards from the beginning.
Authoritative certification: Core components comply with relevant standards and all have CCCF (China Compulsory Certification for Fire Products):
Wireless smoke detectors: GB 20517-2006
Wireless audible and visual alarms: GB 26851-2011
Gas detectors: GB 15322.2-2003This certification is the essential pass for fire acceptance.
Complete functions: The core of acceptance inspection is whether system functions meet standards. Wanlin wireless control panels provide complete fire alarm, fault alarm, self‑inspection and power switching functions. During testing, the panel will issue sound and light alarms and display the location within 10 seconds after the detector is triggered by a professional smoke generator. The bidirectional real‑time communication mechanism of the Wanlin LoRa system ensures high‑standard performance.
“Wireless alarm, wired linkage” scheme: For strict linkage control requirements in acceptance (such as starting spray pumps, fans), Wanlin adopts a golden strategy:Use wireless points for alarm detection, and trigger critical fire equipment through the panel’s hybrid programming logic via wired 2‑wire modules. This solves cabling difficulties while meeting strict acceptance requirements for linkage control.
This system truly achieves a simplified upgrade from “engineering construction” to “simple installation”.
Location selection: Install the wireless fire control panel in the fire control room or duty room. Wall‑mounted installation, dimensions: 340mm × 110mm × 420mm, saving space.
Power and communication: Connect AC220V main power and backup battery (DC7.4V/2100mAh, ensuring ≥8 hours of operation after power failure). The panel has a built‑in 4G module; after inserting a SIM card, it automatically connects to the Wanlin Cloud Platform for mobile APP remote monitoring.
Address coding: Edit the specific address of any zone directly through the main panel or WeChat mini‑program (e.g., “Reception of XX Shop, XX Street”), no manual dialing required as in traditional systems.
Mounting:
Smoke/heat detectors: Fix the base on the ceiling with screws, then twist the detector into place. No cabling needed; powered by internal 3V battery with service life over 2 years.
Wireless sound and light alarm: Powered by DC12V (adaptor supported), wirelessly connected to the panel. Synchronously issues sound and light alarms above 80dB when the panel alarms.
Manual call point: Mounted on exit or corridor walls, powered by lithium‑manganese battery, also requires no wiring.
Device registration: Enter “learning mode” on the panel, trigger detector self‑inspection or button; the panel automatically identifies and adds the device.
Signal testing: Use the panel inspection function to check signal strength of each wireless point. Add repeaters or adjust positions for weak signals based on actual building structure.
Logic programming: Set linkage rules on the panel. For example: when a wireless smoke detector alarms, trigger the local wireless sound and light alarm and output a signal to unlock access control.
Amid the wave of smart fire protection construction, Wanlin LoRa wireless fire alarm system accurately fills market gaps with its distinct advantages: easy installation, low cost, high reliability, and acceptance‑eligible.
Whether you are a property owner troubled by decoration cabling or a contractor undertaking old city renovation projects, Wanlin’s “wireless‑oriented, wired‑assisted” solution provides a reliable balance between safety assurance and efficiency.
Fire safety allows no room for error; a smart choice brings twice the result with half the effort.
The company owns independent brands “Wanlin” and “Smart Home Safety”. Based on technological innovation and new operation models, it designs and implements smart fire safety management cloud platform systems featuring intelligent supervision, operation and alarm for users.
Intelligent fire alarm systems
Intelligent pressure and liquid level systems
Intelligent electrical monitoring systems
Remote alarm systems for fire control panels
Home fire safety management systems
Urban smart fire networking systems
Smart security systems
Platform remote supervision systems and services
It provides complete solutions for smart electricity, water, gas and energy management, widely used in emergency fire services, urban public utilities (water, electricity, gas, heating), municipal engineering, large public buildings, industrial and mining enterprises.
Service Hotline: +86 132 6167 7119